Difference between revisions of "StableBit DrivePool Q4142489"

From Covecube - Wiki
Line 1: Line 1:
Seed a StableBit DrivePool Pool with existing content.
+
Merge multiple pools into a single pool.  
 
 
 
==When to Use==
 
==When to Use==
If you have a lot of data on your disks and you don't want to spend the time copying it over to a new "disk". You can use this procedure to move the files directly onto the pool.
+
When you have more than one pool with a lot of content, and you would rather have a single pool.
  
 
'''This is an advanced procedure. Only proceed if you fully understand every step below.'''
 
'''This is an advanced procedure. Only proceed if you fully understand every step below.'''
Line 11: Line 10:
  
 
==Steps==
 
==Steps==
# Add all the drives with data that you want to pool to a StableBit DrivePool pool
+
#Stop the StableBit DrivePool Service.
#* This will not format the disks, nor will it delete or otherwise alter the existing contents of the disks in any way.
+
#: To do so, run "services.msc", and find the "StableBit DrivePool Service". You can right click on it and stop it that way, or select it and click the "Stop" link in the left-hand sidebarEnable "Show Hidden Files" for the system.
#* This will create a hidden "PoolPart.xxxx" folder on each disk.
 
# Stop the StableBit DrivePool system service.  
 
#: To do so, run "services.msc", and find the "StableBit DrivePool Service". You can right click on it and stop it that way, or select it and click the "Stop" link in the left-hand sidebar.
 
 
#* Note: This is necessary, as we will be moving around files. But if you have realtime duplication or immediate balancing enabled, this will start moving files around and duplicating as well. That is not what we want. We want to move everything first, and then let DrivePool do it's thing.
 
#* Note: This is necessary, as we will be moving around files. But if you have realtime duplication or immediate balancing enabled, this will start moving files around and duplicating as well. That is not what we want. We want to move everything first, and then let DrivePool do it's thing.
#Expose hidden folders in your file manager of choice (Windows Explorer, or Total Commander, etc...).
+
#"Unseed" one of the pools (do this with the pool with the least number of disks):
#*This can be done by enabling "[http://windows.microsoft.com/en-us/windows/show-hidden-files#show-hidden-files=windows-7 Show Hidden Files]" in Explorer/Windows.
+
##Open the "PoolPart.GUID" folder (where "GUID" is a random sequence of letters and numbers).  You should see a folder and file layout that mirrors the pool (or part of it at least).
#Now go to each of the drives, and move the contents of the disks into the "\PoolPart.xxxx\" folder, on the same disk.
+
##Move the contents of the Poolpart.GUID folder out of this folder.
#*For example, find the "G:\Files\" folder, and move the "Files" folder to "G:\PoolPart.xxxx\".  
+
##*This moves the contents out of the pool effectively, as the software uses these folders as the actual contents
#*:After doing this, you should have a "G:\PoolPart.xxxx\Files" folder. And you may notice that it immediately shows up in the pool.
+
##Once the PoolPart folder is empty, delete the folder.
#*Repeat this for each disk in your pool
+
##Repeat this for each of disks in the one pool
 +
#Start the "StableBit DrivePool Service".
 +
#*This is required, as we cannot interact with the software while the service is not running.
 +
#*Starting the service now should cause the pool in question to "disappear", as there are no disks in that pool anymore.
 +
#Add the now unpooled disks to the remaining pool.
 +
#Stop the StableBit DrivePool Service again.
 +
#Seed the existing Pool:
 +
##Expose hidden folders in your file manager of choice (Windows Explorer, or Total Commander, etc...).
 +
##Now go to each of the drives, and move the contents of the disks into the "\PoolPart.xxxx\" folder, on the same disk.
 +
##*For example, find the "G:\Files\" folder, and move the "Files" folder to "G:\PoolPart.xxxx\".  
 +
##*:After doing this, you should have a "G:\PoolPart.xxxx\Files" folder. And you may notice that it immediately shows up in the pool.
 +
##*Repeat this for each disk in your pool
 
#*Once you've done this, you should see all of your content in the Pool directory.
 
#*Once you've done this, you should see all of your content in the Pool directory.
#Reset StableBit DrivePool's settings store if you're using StableBit DrivePool v1.X:  
+
#Manually refresh the pool statistics:
#*[[StableBit_DrivePool_Q2299585]]
+
#*For StableBit DrivePool v1.X, reset the settings:
# Start the StableBit DrivePool service.
+
#**Do this: [[StableBit_DrivePool_Q2299585]]
#Reset StableBit DrivePool's settings store if you're using StableBit DrivePool v2.X:  
+
#**Start the StableBit DrivePool Service
#*[[StableBit_DrivePool_Q2299585B]]
+
#*For StableBit DrivePool v2.X, remeasure the pool:
#*This will verify the duplication integrity of the pool and re-measure all the files.
+
#**Start the StableBit DrivePool Service
 +
#**In the UI, click "Pool Options", and select the "Remeasure" option.
 +
#:This will verify the duplication integrity of the pool and re-measure all the files.
  
You're done.
+
You're done. You should see the contents of both pools in the one remaining pool.

Revision as of 16:01, 18 December 2015

Merge multiple pools into a single pool.

When to Use

When you have more than one pool with a lot of content, and you would rather have a single pool.

This is an advanced procedure. Only proceed if you fully understand every step below.

Please have backups of all your data.

If you are not sure about this and still wish to do this, then please contact Support, so we can set up a remote support session to assist you.

Steps

  1. Stop the StableBit DrivePool Service.
    To do so, run "services.msc", and find the "StableBit DrivePool Service". You can right click on it and stop it that way, or select it and click the "Stop" link in the left-hand sidebarEnable "Show Hidden Files" for the system.
    • Note: This is necessary, as we will be moving around files. But if you have realtime duplication or immediate balancing enabled, this will start moving files around and duplicating as well. That is not what we want. We want to move everything first, and then let DrivePool do it's thing.
  2. "Unseed" one of the pools (do this with the pool with the least number of disks):
    1. Open the "PoolPart.GUID" folder (where "GUID" is a random sequence of letters and numbers). You should see a folder and file layout that mirrors the pool (or part of it at least).
    2. Move the contents of the Poolpart.GUID folder out of this folder.
      • This moves the contents out of the pool effectively, as the software uses these folders as the actual contents
    3. Once the PoolPart folder is empty, delete the folder.
    4. Repeat this for each of disks in the one pool
  3. Start the "StableBit DrivePool Service".
    • This is required, as we cannot interact with the software while the service is not running.
    • Starting the service now should cause the pool in question to "disappear", as there are no disks in that pool anymore.
  4. Add the now unpooled disks to the remaining pool.
  5. Stop the StableBit DrivePool Service again.
  6. Seed the existing Pool:
    1. Expose hidden folders in your file manager of choice (Windows Explorer, or Total Commander, etc...).
    2. Now go to each of the drives, and move the contents of the disks into the "\PoolPart.xxxx\" folder, on the same disk.
      • For example, find the "G:\Files\" folder, and move the "Files" folder to "G:\PoolPart.xxxx\".
        After doing this, you should have a "G:\PoolPart.xxxx\Files" folder. And you may notice that it immediately shows up in the pool.
      • Repeat this for each disk in your pool
    • Once you've done this, you should see all of your content in the Pool directory.
  7. Manually refresh the pool statistics:
    • For StableBit DrivePool v1.X, reset the settings:
    • For StableBit DrivePool v2.X, remeasure the pool:
      • Start the StableBit DrivePool Service
      • In the UI, click "Pool Options", and select the "Remeasure" option.
    This will verify the duplication integrity of the pool and re-measure all the files.

You're done. You should see the contents of both pools in the one remaining pool.