Difference between revisions of "StableBit DrivePool Q7420208"

From Covecube - Wiki
Jump to: navigation, search
m
 
Line 8: Line 8:
 
#On the client having the issue , run the following commands from an elevated (administrative) command prompt:  
 
#On the client having the issue , run the following commands from an elevated (administrative) command prompt:  
 
#* "REG ADD HKLM\SYSTEM\CurrentControlSet\Services\LanManWorkstation\Parameters /v DirectoryCacheLifetime /t REG_DWORD /d 0"
 
#* "REG ADD HKLM\SYSTEM\CurrentControlSet\Services\LanManWorkstation\Parameters /v DirectoryCacheLifetime /t REG_DWORD /d 0"
 +
#* "REG ADD HKLM\SYSTEM\CurrentControlSet\Services\LanManWorkstation\Parameters /v FileNotFoundCacheLifetime /t REG_DWORD /d 0"
 
#* "REG ADD HKLM\SYSTEM\CurrentControlSet\Services\LanManWorkstation\Parameters /v FileInfoCacheLifetime /t REG_DWORD /d 0"
 
#* "REG ADD HKLM\SYSTEM\CurrentControlSet\Services\LanManWorkstation\Parameters /v FileInfoCacheLifetime /t REG_DWORD /d 0"
 +
 
# Reboot the system
 
# Reboot the system

Latest revision as of 10:16, 28 October 2016

Disable SMB caching

When to Use

If the pool is not properly refreshing file lists when adding content to the pool.

Steps

  1. On the client having the issue , run the following commands from an elevated (administrative) command prompt:
    • "REG ADD HKLM\SYSTEM\CurrentControlSet\Services\LanManWorkstation\Parameters /v DirectoryCacheLifetime /t REG_DWORD /d 0"
    • "REG ADD HKLM\SYSTEM\CurrentControlSet\Services\LanManWorkstation\Parameters /v FileNotFoundCacheLifetime /t REG_DWORD /d 0"
    • "REG ADD HKLM\SYSTEM\CurrentControlSet\Services\LanManWorkstation\Parameters /v FileInfoCacheLifetime /t REG_DWORD /d 0"
  1. Reboot the system